The RFX Race Series tools are a selection of high-quality tools that allow you to carry out all maintenance tasks on your off-road motorcycle. Made using only the best materials such as chrome vanadium and other high-strength steels, the RFX Race Series tools are suitable for both amateur and professional mechanics.
- Seal around the inner cable and outer sleeve.
- Fits a wide range of cable sizes.
- Allows lubricant to be injected into the cables.
- Accepts a wide variety of nozzle types.
- Once the lubricant flows freely from the other end, the cable is lubricated.
Usage Instructions:
- Slide the rubber cap down and loosen the cable adjustments to free the cable.
- Disassemble the throttle housing or clutch lever mount and remove the cable.
- Take the cable out of its lower position, whether on the carburetor, throttle body, or clutch arm.
- Open the cable greaser and place it on the inner sleeve.
- Slide the outer sleeve of the cable into the cable greaser and tighten the large screw on top.
- Using a lubricant spray, insert the nozzle (use an extension if necessary) into the cable greaser and spray.
- Spray until the lubricant flows freely from the lower end of the cable.
- Reposition the cable by reversing the steps of its removal.
- Once installed, check and adjust the cable play, ensuring to turn the handlebars on each side to their maximum position.
Specifications:
- weight (g): 49
- width (mm): 93
- height (mm): 35
- length (mm): 133
- volume (cm³): 433
